LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Compass Sport SE, 2.0L Eng VIN A >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Electronic Control Modules (Service Information) >> Module, Transmission Control >> Standard Procedure >> Standard Procedure - Transmission Control Module Initialization >> Initial Learn (Brand-New Module, Memory Already Clear)

Initial Learn (Brand-New Module, Memory Already Clear)

Battery must be connected. If the Totally Integrated Power Module (TIPM) is to be configured, configure the TIPM and then turn ignition key to OFF/LOCKED briefly, then back to RUN. The shifter must be in PARK or NEUTRAL, engine not running.

  1. Turn the ignition key to RUN for 4 seconds to allow reading of new values.
  2. Turn ignition key to OFF/LOCKED for 2 seconds to allow storing new values in EEROM.
  3. Turn the ignition key to RUN, with scan tool clear DTCs.
  4. Turn ignition key to OFF/LOCKED for 2 seconds.
  5. After at least 7 seconds, read DTCs.
  6. If DTCs resets, refer to DIAGNOSIS AND TESTING .
scientia non olet · About LEMON Manuals