Body, Air Cleaner: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Air Cleaner Body, Air Inlet Tube & Make-Up Air Hose

Courtesy of CHRYSLER GROUP, LLC

Make sure the rubber grommets, for the air cleaner body lower pins, are in place when reinstalling the air cleaner body.
Push down on the air cleaner body (1) to engage the pins into the grommets.
Install the support bracket bolt to the strut tower and tighten to 10 N.m (89 in. lbs.).
Install the air inlet tube (2) to the air cleaner body (1).
Connect the make-up air hose (3) to the air cleaner body.

Fig 2: Electrical Connectors, PCM, Three Mounting Bolts & Ground Wire
Courtesy of CHRYSLER GROUP, LLC
Position the PCM (4) on the air cleaner body cover.
Install three mounting bolts (3) with one ground wire (1) and tighten to 10 N.m (89 in. lbs.).

Fig 3: Retainers, Fresh Air Inlet Duct & Air Cleaner Body
Courtesy of CHRYSLER GROUP, LLC
Install the fresh air inlet duct (3) on the air cleaner body (1) and lock the retainers (2).