Cluster Assembly
Courtesy of CHRYSLER GROUP, LLC
- Position the instrument cluster (1) close enough to the instrument panel to reconnect the instrument panel wire harness connectors to the connector receptacles on the back of the cluster housing.
- Position the instrument cluster mounting tabs to the mounting holes in the instrument panel structural support (3).
- Install and tighten the four screws (2) that secure the mounting tabs of the instrument cluster. Tighten the screws to 2 N.m (17 in. lbs.).
- Reinstall the instrument panel top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION
.
- Reconnect the battery negative cable.