Diagnostic Test

VERIFY DTC IS ACTIVE 

1. Turn the ignition on.
2. With the scan tool, read and record ABS DTCs.
3. With the scan tool, read and record Environmental Data (EV Data).
4. With the scan tool, erase ABS DTCs.
5. Cycle the ignition switch.
6. With the scan tool, read ABS DTCs.

   Does this DTC reset?

   Yes 

   • Replace the Dynamics Sensor in accordance with the Service Information.
   • Perform ABS VERIFICATION TEST. Refer to ABS VERIFICATION TEST .

   No 

   • The condition that caused the symptom is currently not present. Inspect the related wiring for a possible intermittent condition. Look for any chafed, pierced, pinched, or partially broken wires.
   • Refer to the ABS-INTERMITTENT CONDITION TEST. Refer to ABS-INTERMITTENT CONDITION .