End Play Tolerance
WARNING: This page is about a different variant/trim than selected.
| ITEM | TOLERANCE |
| Input shaft end play (Rear) | 0.25 - 0.45 mm (0.0098 - 0.0177 in.) |
| 2/6 brake pressure plate end play | 2.05 - 2.35 mm (0.0807 - 0.0925 in.) |
| Low & reverse brake pressure plate end play | 2.25 - 2.55 mm (0.0886 - 0.1004 in.) |
| Under drive brake snap ring end play | 0.65 - 0.95 mm (0.0255 - 0.0374 in.) |
| Over drive clutch snap ring end play | 1.05 - 1.35 mm (0.0413 - 0.0531 in.) |
| 3-5-R clutch snap ring end play | 0.85 - 1.15 mm (0.0335 - 0.0453 in.) |
| Middle & rear planetary gear end play | 0.1 - 0.4 mm (0.0039 - 0.0157 in.) |
| Input shaft end play (Front) | 0.55 - 0.85 mm (0.0216 - 0.0334 in.) |
| Differential side gear & differential pinion gear backlash | 0.025 - 0.150 mm (0.0009 - 0.0059 in.) |