Clutch, Brake, Thrust And Bearing Clearance
WARNING: This page is about a different variant/trim than selected.
For transfer bearing and differential bearing shim selection perform Bearing Turning Torque Measurement. Refer to BEARING TURNING TORQUE MEASUREMENT .
| Element | mm | in. |
| 3-5-Reverse Clutch | 0.85 to 1.15 | 0.033 to 0.045 |
| Overdrive Clutch | 1.25 to 1.55 | 0, 049 to 0.061 |
| 2-6 Brake | 2.05 to 2.35 | 0.080 to 0.092 |
| Underdrive Brake | 0.65 to 0.95 | 0.025 to 0.037 |
| Low-Reverse Brake | 2.25 to 2.55 | 0.088 to 0.100 |
| Middle-rear Planetary Thrust Washer | 0.1 to 0.4 | 0.003 to 0.015 |
| Rear Cover Bearing Spacer | 0.25 to 0.45 | 0.009 to 0.017 |