Differential Bearing: Fwd: Notes

WARNING: This page is about a different variant/trim than selected.

Remove the transaxle from the vehicle. Refer to REMOVAL .
Separate the Bell housing from the transaxle housing. Refer to DISASSEMBLY .

Fig 1: Differential & Transaxle Housing
Courtesy of CHRYSLER GROUP, LLC
Separate the differential (1) from the transaxle housing (2). Refer to DISASSEMBLY .

Fig 2: Differential Ring Gear & Bolts
Courtesy of CHRYSLER GROUP, LLC
Remove bolts holding the ring gear (3) to the differential (2)

Fig 3: Differential, Ring Gear & Bearing
Courtesy of CHRYSLER GROUP, LLC
Separate the ring gear (1) from the differential (3).

Fig 4: Removing Bearing From Differential
Courtesy of CHRYSLER GROUP, LLC
Using tools (special tool #C-293-PA, Puller, Press) press (4), (special tool #C-293-48, Block Set, Puller) collets (5), and (special tool #C-4996, Adapter, Plug) plug (3), secured in a vise, remove the bearing (2) from the differential (1) (ring gear side shown in illustration).