Cable, Shift: Removal: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect and isolate the negative battery cable.
Remove the air cleaner body. For 2.0L, refer to BODY, AIR CLEANER, REMOVAL . For 2.4L, refer to BODY, AIR CLEANER, REMOVAL .

Fig 1: Shifter Cable End & Manual Lever
Courtesy of CHRYSLER GROUP, LLC
Carefully separate the shifter cable end (1) from the manual lever (2).

Fig 2: Cable, Bracket & Tabs
Courtesy of CHRYSLER GROUP, LLC
Simultaneously squeeze the retention tabs (2) together while lifting the cable (1) from the bracket (3).

Fig 3: Shifter Cable Housing & Routing Bracket
Courtesy of CHRYSLER GROUP, LLC
Detach the shifter cable housing (1) from the routing bracket.
Remove the shifter. Refer to SHIFTER, FLOOR CONSOLE, REMOVAL .

Fig 4: Identifying Shifter Cable & Clip
Courtesy of CHRYSLER GROUP, LLC
Rotate the shifter cable retention collar counter-clockwise (2) at cable (1).

Fig 5: Clip And Cable
Courtesy of CHRYSLER GROUP, LLC
Pull cable (2) down from bracket (1).
Loosen the hold down bolts at the air bag module. Refer to MODULE, OCCUPANT RESTRAINT CONTROLLER, REMOVAL .

Fig 6: Shifter Cable
Courtesy of CHRYSLER GROUP, LLC
Release the grommet (1) at the bulkhead.
Pull the cable and grommet (2) through the bulkhead into the cabin compartment.