Cylinder, Clutch Slave: Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Fig 1: Concentric Slave Cylinder Location

Courtesy of CHRYSLER GROUP, LLC

WARNING:

Chrysler LLC does not manufacture any vehicles or replacement parts that contain asbestos. Aftermarket products may or may not contain asbestos. Refer to aftermarket product packaging for product information. Whether the product contains asbestos or not, dust and dirt can accumulate on manual clutch parts during normal use. Follow practices prescribed by appropriate regulations for the handling, processing and disposing of dust and debris.

Install slave cylinder (1) to transaxle using new bolts.
NOTE:
Torque three CSC body screws first, then torque the fluid tube attachment.
Torque slave cylinder-to-case bolts in three steps:
1. 2 N.m (18 in. lbs.)
2. 5 N.m (44 in. lbs.)
3. 8.4 N.m (74 in. lbs.)
Install transaxle. Refer to INSTALLATION .
Bleed clutch hydraulic system. Refer to STANDARD PROCEDURE .