LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Compass Sport SE, 2.0L Eng VIN A >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.0L Engine (Service Information) >> Cylinder Head >> Bucket, Tappet >> Removal >> Removal

Bucket, Tappet: Removal: Removal

Fig 1: Removing/Installing Cylinder Head Cover Bolts In Sequence
GC0084804Courtesy of CHRYSLER GROUP, LLC
NOTE:

This procedure is for in-vehicle service with camshafts installed.

NOTE:

Camshaft tappets must be replaced if cylinder head or camshafts are replaced.

  1. Remove cylinder head cover . Refer to COVER(S), CYLINDER HEAD, REMOVAL  .
  2. Remove camshafts . Refer to CAMSHAFT, ENGINE, REMOVAL  .
    Fig 2: Tappet Identification
    GC0084805Courtesy of CHRYSLER GROUP, LLC
  3. Remove camshaft tappets (1).
  4. Repeat removal procedure for each camshaft tappet (1).
  5. If reusing, mark each camshaft tappet for reassembly in it's original position.
scientia non olet · About LEMON Manuals