Seal, Crankshaft Oil, Front: Installation: Installation

Fig 1: Crankshaft Oil Seal & Seal Installer 9506

Courtesy of CHRYSLER GROUP, LLC

1. Place seal (1) onto Front Crankshaft Seal Installer (special tool #9506, Installer, Oil Seal) (2) with seal spring towards the inside of engine.
   Fig 2: Installing Front Seal

   Courtesy of CHRYSLER GROUP, LLC
2. Install new seal (1) by using Front Crankshaft Seal Installer (special tool #9506, Installer, Oil Seal) (2) and crankshaft damper bolt (3).
   Fig 3: Front Seal Installed

   Courtesy of CHRYSLER GROUP, LLC
3. Press seal into front cover until Front Crankshaft Seal Installer (special tool #9506, Installer, Oil Seal) (1) seats against timing chain cover (3).
4. Remove Front Crankshaft Seal Installer (special tool #9506, Installer, Oil Seal) (1).
   Fig 4: Damper Removal & Installation

   Courtesy of CHRYSLER GROUP, LLC
5. Install crankshaft vibration damper.
6. Oil the bolt threads and between the bolt head and washer.
7. Install damper retaining bolt and Damper Holder (special tool #9707, Holder, Vibration Damper) (1). Tighten bolt to 210 N.m (155 ft. lbs.).