Insulator, Engine Mount, Left: Installation: Installation

Fig 1: Left Engine Mount Assembly

Courtesy of CHRYSLER GROUP, LLC

1. Position mount (2) in place.
2. Install left mount to frame rail bolts (1) and torque to 75 N.m (55 ft. lbs.).
3. Install mount through bolt (3) and torque to 100 N.m (74 ft.lbs.).
4. Remove jack.
   Fig 2: Air Cleaner Body, Air Inlet Tube & Make-Up Air Hose

   Courtesy of CHRYSLER GROUP, LLC
5. Push down on the air cleaner body (1) to engage the pins into the grommets.
6. Install the support bracket bolt to the strut tower and tighten to 10 N.m (89 in. lbs.).
7. Install the air inlet tube (2) to the air cleaner body (1).
8. Connect the make-up air hose (3) to the air cleaner body.
   Fig 3: Electrical Connectors, PCM, Three Mounting Bolts & Ground Wire

   Courtesy of CHRYSLER GROUP, LLC
9. Install the mounting bolt (3) with ground wire (1) and tighten to 12 N.m (106 in. lbs.).
10. Connect and lock the electrical connectors (2).
    Fig 4: Retainers, Fresh Air Inlet Duct & Air Cleaner Body

    Courtesy of CHRYSLER GROUP, LLC
11. Connect the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
12. Install the fresh air inlet duct (3) on the air cleaner body (1) and lock the retainers (2).