Audio/Video/Entertainment/Connectivity (Service Information): Radio: Removal: Removal

Fig 1: Radio, Antenna Cable & Connector

Courtesy of CHRYSLER GROUP, LLC

If radio is equipped with an internal hard disk drive (HDD), perform a complete backup of user data. Refer to STANDARD PROCEDURE .
Disconnect and isolate the battery negative cable.
Remove instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, REMOVAL .
Remove mounting fasteners and remove radio from instrument panel.
Disconnect wire harness connectors from radio.
CAUTION:
Pulling the antenna cable straight out of the radio without pulling on the locking antenna connector could damage the cable or radio.
Disconnect the antenna cable (3) by pulling the locking antenna connector (2) away from the radio (1).