LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Compass Sport SE, 2.0L Eng VIN A >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Body - Interior & Exterior >> Instrument Panel >> Cover, Instrument Panel >> Installation >> Cover-Lower Instrument Panel

Cover-Lower Instrument Panel

Fig 1: Passenger Side Support Bolts
GC0099097Courtesy of CHRYSLER GROUP, LLC
  1. Install the lower cover to the IP structure.
  2. Carefully pull the sides of the lower cover outwards and engage to the tabs (3) that hold the cover to the IP structure.
  3. Install the 28 screws (4) securing the lower IP cover (1) to the instrument panel structure.
  4. Install the lower shifter cable bracket under the center stack of the IP.
    Fig 2: Antenna Connector
    GC0099096Courtesy of CHRYSLER GROUP, LLC
  5. If equipped, install the navigation antenna.
  6. Connect the electrical connector to the remote compass module and remote start antenna, if equipped.
  7. Install the steering column from the vehicle. Refer to COLUMN, INSTALLATION .
  8. Install the passenger side silencer pad.
  9. Install the driver and passenger side end caps.
    Fig 3: Steering Column Reinforcement & Fasteners
    GC0099095Courtesy of CHRYSLER GROUP, LLC
  10. Remove the instrument cluster fasteners.
  11. Connect the electrical connectors to the cluster and install to the vehicle.
  12. Install the cowl trim panels.
  13. Install the steering column reinforcement (1) and install the fasteners (2).
  14. Install the steering column opening cover and screws.
    Fig 4: Upper Instrument Panel Cover
    GC0098507Courtesy of CHRYSLER GROUP, LLC
  15. Install the shifter assembly. Refer to SHIFTER, TRANSMISSION, INSTALLATION .
  16. Install the center floor console. Refer to CONSOLE, FLOOR, INSTALLATION .
  17. Install the upper IP top cover. Refer to COVER, INSTRUMENT PANEL, INSTALLATION .
  18. Connect the battery negative cable.
scientia non olet · About LEMON Manuals