Panel, B-Pillar Trim, Lower: Installation: Installation

Fig 1: B-Pillar Lower Trim

Courtesy of CHRYSLER GROUP, LLC

1. Position the seat belt through the hole in the lower B-pillar trim.
2. Position the lower tabs (3) into the scuff plate (4) and seat the upper retaining clips (1) fully.
   Fig 2: Upper & Lower B-Pillar Trim

   Courtesy of CHRYSLER GROUP, LLC
3. Install and tighten the screw (3) that secures the turning loop to the height adjuster. Tighten the screw to 40 N.m (30 ft. lbs.).
   Fig 3: Front Seat Belt, Screw & Cover

   Courtesy of CHRYSLER GROUP, LLC
4. Position the seat belt (3) lower anchor to the mounting hole on the outboard side of the front seat cushion frame. Be certain that the seat belt webbing between the turning loop and the lower anchor is not twisted.
5. Install and tighten the screw (2) that secures the lower anchor to the seat. Tighten the screw to 51 N.m (37.5 ft. lbs.).
6. Install the lower anchor cover (1) onto the front seat cushion outboard side shield (4).