Glass Preparation - Installing A New Liftgate Glass

Fig 1: Liftgate Glass & Spacers

Courtesy of CHRYSLER GROUP, LLC

1. Apply two new spacers (2) to the liftgate frame.
2. Install the lower spacers to the liftgate horizontal flange.
   Fig 2: Windshield Primer

   Courtesy of CHRYSLER GROUP, LLC

   1 - PRIMER

   2 - WINDSHIELD SEAL

   NOTE:

   Typical primer installation shown in illustration.

3. Clean and dry area of glass (2) to be re-glued with a suitable glass preparation solvent and rag.
4. Apply primer to gluing surface at liftgate glass seal.
   Fig 3: Applying Primer

   Courtesy of CHRYSLER GROUP, LLC
5. Apply primer (1) around the perimeter of the glass to a width of 15 mm (0.5 in.) (2).
6. Allow primer to air dry for at least 10 minutes.
7. Using a flash light, verify that glass primer is without damage.