Panel, Door Trim, Bolster: Removal: Removal

Fig 1: Bolster

Courtesy of CHRYSLER GROUP, LLC

Disconnect and isolate battery negative cable.
Remove the screw (1) from the pull handle.
Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the bolster (3) from the door module (2).

Fig 2: Window Switch Electrical Connectors
Courtesy of CHRYSLER GROUP, LLC
Disconnect the electrical connectors (1), if equipped.

Fig 3: Bolster Tethers
Courtesy of CHRYSLER GROUP, LLC
Disconnect the tethers (1) and remove the bolster (2).