Plate, Carrier: Removal: Removal

Fig 1: Lower Trim Screws

Courtesy of CHRYSLER GROUP, LLC

Loosen lower screws (2).

Fig 2: Speaker, Trim & Screws
Courtesy of CHRYSLER GROUP, LLC
Remove speaker (5). Refer to SPEAKER, REMOVAL .
Remove the trim screws (4) from the speaker opening.
Remove the trim cap (6) and the screw (1) at the inside handle.
Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, remove the outside mirror trim (2).

Fig 3: Removing & Installing Glass
Courtesy of CHRYSLER GROUP, LLC
Remove the door glass. Refer to GLASS, DOOR, REMOVAL .

Fig 4: Latch Linkages & Screws
Courtesy of CHRYSLER GROUP, LLC
Disconnect the latch linkages (1 and 2).
Remove the latch screws (4).

Fig 5: Harness Fasteners
Courtesy of CHRYSLER GROUP, LLC
Disconnect main harness connector.
Remove screws and separate harness from door frame.

Fig 6: Upper Regulator Fasteners
Courtesy of CHRYSLER GROUP, LLC
Remove three upper bolts (1).

Fig 7: Module, Trim Hooks & Screws
Courtesy of CHRYSLER GROUP, LLC
Lift the module (1) up off of the four trim hooks (3) and the lower regulator screws (4).
Pull the front of the trim module (1) out from the door and forward to remove the latch.