LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Compass Sport SE, 2.0L Eng VIN A >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body - Interior & Exterior >> Door - Front >> Regulator, Window >> Installation >> Installation

Regulator, Window: Installation: Installation

Fig 1: Regulator Motor, Runners, Support Brackets & Electrical Connectors
GC0085115Courtesy of CHRYSLER GROUP, LLC
  1. Position the regulator assembly onto the door trim panel and seat the runner support clips (6) fully.
  2. Connect the regulator motor (1) electrical connector (7).
    Fig 2: Lower Regulator Fasteners
    GC0085114Courtesy of CHRYSLER GROUP, LLC
  3. Install the lower regulator screws (2) but do not tighten them at this time.
    Fig 3: Upper Regulator Fasteners
    GC0085113Courtesy of CHRYSLER GROUP, LLC
  4. Install the motor or manual lift mechanism screws (2).
    Fig 4: Module, Trim Hooks & Screws
    GC0085109Courtesy of CHRYSLER GROUP, LLC
  5. Install the door trim module (1). Refer to PLATE, CARRIER, INSTALLATION .
scientia non olet · About LEMON Manuals