Glass, Door: Installation: Installation

Fig 1: Rear Door Glass & Regulator

Courtesy of CHRYSLER GROUP, LLC

Install the glass (2) into the door.

Fig 2: Glass Run
Courtesy of CHRYSLER GROUP, LLC
Install the glass run (2) assembly into the door and seat fully.
Install the screw (1) and tighten to 8 N.m (71 in. lbs.).

Fig 3: Rear Door Outer Weatherstrip
Courtesy of CHRYSLER GROUP, LLC
Install the outer belt molding (1) and install the screws (2).

Fig 4: Rear Door Inner Belt Molding
Courtesy of CHRYSLER GROUP, LLC
Install the inner belt molding (1).
Install the foam block and install the two screws.

Fig 5: Module, Four Trim Hooks & Screw
Courtesy of CHRYSLER GROUP, LLC
Position the glass into the full up position and tape into place.
Install the door trim module (1). Refer to PLATE, CARRIER, INSTALLATION .