Striker, Door Latch: Adjustments: Adjustments
Courtesy of CHRYSLER GROUP, LLC
- Using a grease pencil or equivalent, mark the location of the door latch striker (2) on the C-pillar to aid in adjustment.
- Loosen the two bolts (1) that secure the door latch striker to the C-pillar.
- To adjust the rear gap and flush measurement, change the position of the door latch striker and then tighten the two bolts to 26 N.m (19 ft. lbs.). Refer to GAP AND FLUSH, SPECIFICATIONS .
- Verify correct door and latch position.