Body - Interior & Exterior: Hood: Installation: Installation

Fig 1: Hood

Courtesy of CHRYSLER GROUP, LLC

NOTE:

The Vehicle Emission Control Information (VECI) label(s) must be in place for the life of the vehicle. When replacing the component in which the VECI label is adhered, a new VECI label must also be adhered to the new component.

Position hood (1) on hinges.
Install bolts (2) finger-tight.
Align hinges with installation reference marks made previously and tighten bolts to 20 N.m (15 ft. lbs.).
If required, adjust the hood to the correct position. Refer to GAP AND FLUSH, SPECIFICATIONS .