Driver Seat

Fig 1: Drivers Inner Shield

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, WARNING .
Remove the seat cushion. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL .
Remove both of the inner side shields (2).

Fig 2: Lift Lever Trim Cap
Courtesy of CHRYSLER GROUP, LLC
Remove the lift lever trim cap (2).

Fig 3: Lift Lever & Screws
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (2) and remove the lift lever (1).

Fig 4: Recliner Handle Clip
Courtesy of CHRYSLER GROUP, LLC
Separate the clip (2).

Fig 5: Recliner Handle
Courtesy of CHRYSLER GROUP, LLC
Remove the recliner handle (1).

Fig 6: Outer Shield Screw
Courtesy of CHRYSLER GROUP, LLC
Remove the screws (2) attaching the inboard and outboard side shields (1) to the seat frame.

Fig 7: Outer Shield Tabs
Courtesy of CHRYSLER GROUP, LLC
Separate the clip fasteners (2) and remove the side shields from the seat cushion frame tabs (1).

Fig 8: Driver Seat Back Bolts
Courtesy of CHRYSLER GROUP, LLC

WARNING:
Discard and replace the seat back bolts (1) with new bolts when servicing. Installing used bolts may result in the loosening of the seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.
Remove and discard the bolts (1) and remove the seat back assembly (2).