Windshield Opening Preparation

Fig 1: Smoothing Windshield Adhesive

Courtesy of CHRYSLER GROUP, LLC

1 - OLD ADHESIVE

2 - SCRAPER

3 - WINDSHIELD OPENING

Clean and vacuum windshield opening.
Level old bead of windshield opening adhesive (1) to a thickness of approximately 1 mm (0.04 in.) and remove loose adhesive.

Fig 2: Applying Windshield Primer
Courtesy of CHRYSLER GROUP, LLC

1 - PRIMER

2 - WINDSHIELD OPENING
Clean and dry area of windshield opening to be re-glued with a suitable glass preparation solvent and rag.
Re-prime any damaged area. If old adhesive has been exposed for more than 12 hours, entire adhesive area needs to be re-primed.
Allow primer to air dry for at least 10 minutes.