Bulb - Halogen Headlamp - Domestic - Compass (MK49)
CAUTION:
Do not contaminate the bulb glass by touching it with your fingers or by allowing it to contact other oily surfaces. Shortened bulb life will result.
- Disconnect and isolate the battery negative cable.
- Reach behind the front lamp unit to access the bulbs from the back of the lamp housing (1).
- Disconnect the Front End Module (FEM) wire harness connector from the low beam (2) or high beam (5) bulb base connector receptacle.
- Firmly grasp the low beam or high beam bulb base on the back of the front lamp unit housing and rotate it counterclockwise about 30 degrees to unlock it.
- Pull the bulb and base straight out from the keyed opening in the reflector.