Horn System (Service Information): Horn: Removal: Removal

Fig 1: Horn

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate the negative cable from the battery.
2. Remove the left (low note horn) or right (high note horn) front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, REMOVAL .
3. Disconnect the headlamp and dash wire harness connector from the horn.
4. Remove the nut that secures the horn mounting bracket to the weld stud on the back of the tab of the front bumper reinforcement to frame rail mounting flange.
5. Remove the horn and mounting bracket from the stud as a unit.