Horn System (Service Information): Horn: Installation: Installation

Fig 1: Horn

Courtesy of CHRYSLER GROUP, LLC

1. Position the horn mounting bracket to the weld stud on the back of the tab of the left (low note horn) or right (high note horn) front bumper reinforcement to frame rail mounting flange.
2. Install and tighten the nut that secures the horn mounting bracket to the weld stud. Tighten the nut securely.
3. Reconnect the headlamp and dash wire harness connector to the horn.
4. Reinstall the left or right front wheelhouse splash shield. Refer to SHIELD, SPLASH, FRONT WHEELHOUSE, INSTALLATION .
5. Reconnect the negative cable to the battery.