Audio/Video/Entertainment/Connectivity (Service Information): Radio: Installation: Installation

Fig 1: Radio, Antenna Cable & Connector

Courtesy of CHRYSLER GROUP, LLC

1. Connect the wire harness connectors and antenna cable to radio.
2. Insert radio into instrument panel.
3. Install mounting fasteners. Tighten to 2 N.m (20 in. lbs.).
4. Install instrument panel center bezel. Refer to BEZEL, INSTRUMENT PANEL, CENTER, INSTALLATION .
5. Connect battery negative cable.
6. If radio is equipped with an internal hard disk drive (HDD), restore user data from backup. Refer to STANDARD PROCEDURE .