Plate, Carrier: Installation: Installation

Fig 1: Module, Trim Hooks & Screws

Courtesy of CHRYSLER GROUP, LLC

Position the latch into the door and set the trim module (1) in place.
Position the four trim hooks (3) and the lower regulator screws (4) into the corresponding slots (2) in the door and seat trim module fully.

Fig 2: Harness Fasteners
Courtesy of CHRYSLER GROUP, LLC
Position the wire harness door bracket (2) into the door and install the screws (3).

Fig 3: Upper Regulator Fasteners
Courtesy of CHRYSLER GROUP, LLC
Install the upper regulator screws (1) and tighten to 8 N.m (71 in. lbs.)

Fig 4: Lower Trim Screws
Courtesy of CHRYSLER GROUP, LLC
Tighten the lower trim screws (2) to 6 N.m (53 in. lbs.).

Fig 5: Latch Linkages & Screws
Courtesy of CHRYSLER GROUP, LLC
Install the latch screws (4).
Tighten the screws to 7 N.m (62 in. lbs.).
Attach the exterior handle rod (1) and lock rod (2).

Fig 6: Removing & Installing Glass
Courtesy of CHRYSLER GROUP, LLC
Install the door glass. Refer to GLASS, DOOR, INSTALLATION .

Fig 7: Speaker, Trim & Screws
Courtesy of CHRYSLER GROUP, LLC
Install the mirror trim (2).
Install the screws (3, 4) in the front corner and tighten to 6 N.m (53 in. lbs.).
Install the screw (1) at the inside handle and seat the trim (6) fully.
Install the speaker (5). Refer to SPEAKER, INSTALLATION .