Panel, Rear Door Trim, Bolster: Removal: Removal

Fig 1: Rear Door Bolster

Courtesy of CHRYSLER GROUP, LLC

1. Disconnect and isolate battery negative cable.
2. Remove the screw (1) from the pull handle.
3. Using a trim stick (special tool #C-4755, Trim Stick) or equivalent, separate the bolster (3) from the door module (2).
   Fig 2: Bolster, Tethers & Connectors

   Courtesy of CHRYSLER GROUP, LLC
4. Disconnect the electrical connectors (2), if equipped.
5. Disconnect the tethers (1) and remove the bolster (3).