Passenger Seat

Fig 1: Passenger Seat Back In Down Position

Courtesy of CHRYSLER GROUP, LLC

Before proceeding with the following repair procedure, review all warnings and cautions. Refer to SEATS, WARNING .
Remove the seat cushion. Refer to COVER, SEAT CUSHION, FRONT, REMOVAL .
Fold the seat back (1) into the down position.

Fig 2: Inner Side Shields
Courtesy of CHRYSLER GROUP, LLC
Remove both of the inner side shields (1).

Fig 3: Seat Back Frame & Recliner Cable
Courtesy of CHRYSLER GROUP, LLC
Release the cable housing (2) from the seat back frame and disconnect the recliner cable ends (4).
Remove the screw (5) and remove the recliner shields (1).
Remove the screw (3) attaching the inboard and outboard side shields to the seat frame.

Fig 4: Outer Shield Tabs
Courtesy of CHRYSLER GROUP, LLC
Separate the clip fasteners (2) and remove the side shields from the seat cushion frame tabs (1).

Fig 5: Seat Back Bolts
Courtesy of CHRYSLER GROUP, LLC

WARNING:
Discard and replace the seat back bolts (2) with new bolts when servicing. Installing used bolts may result in the loosening of the seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.
Remove and discard the bolts (2) and remove the seat back assembly (1).