Passenger Seat

Fig 1: Seat Back Bolts

Courtesy of CHRYSLER GROUP, LLC

WARNING:

Discard and replace the seat back bolts (2) with new bolts when servicing. Installing used bolts may result in the loosening of the seat back bolts after repair. Failure to follow these instructions may result in serious or fatal injury.

Install the seat back assembly (1) and install the new bolts (2).
Tighten the bolts to 40 N.m (30 ft. lbs.).

Fig 2: Outer Shield Tabs
Courtesy of CHRYSLER GROUP, LLC
Position the side shields onto the seat adjuster tabs (1) and seat the clip (2) fully.

Fig 3: Seat Back Frame & Recliner Cable
Courtesy of CHRYSLER GROUP, LLC
Install the screws (3) attaching the inboard and outboard side shields to the seat frame.
Install the recliner shields (1) and install the screws (5).
Connect the recliner cable ends (4) and fasten the cable housing (2) to the seat back frame.

Fig 4: Inner Side Shields
Courtesy of CHRYSLER GROUP, LLC
Install both of the inner side shields (1).

Fig 5: Passenger Seat Back In Down Position
Courtesy of CHRYSLER GROUP, LLC
Position the seat back (1) into the upright position.
Install the seat cushion. Refer to COVER, SEAT CUSHION, FRONT, INSTALLATION .