LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Jeep >> 2016 >> Compass Sport SE, 2.0L Eng VIN A >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Interior/Exterior Trim >> Body - Interior & Exterior >> Sunroof >> Sunshade, Sunroof >> Installation >> Installation

Sunshade, Sunroof: Installation: Installation

Fig 1: Installing Sunshade
GC0082702Courtesy of CHRYSLER GROUP, LLC
  1. Verify the sunshade track is free of obstructions like the trim lace/ring.
  2. Start with sunshade (2) at an angle with one foot (1) in the track.
  3. Rotate the sunshade so the other rear foot is in the track as well as the 2 other feet (3) on the same side as the first foot.
    Fig 2: Inserting Remaining Feet Into Track
    GC0082703Courtesy of CHRYSLER GROUP, LLC
  4. To insert the remaining two feet (2) apply force to the middle front of sunshade (3) and guide them into the track.
  5. Check that all the feet are in the right track and verify sunshade operation.
  6. Install the drain trough. Refer to TUBE, SUNROOF DRAIN, INSTALLATION .